dmesg - MAXTOR STM350063 - POWER9 altivec supported

Return To MAXTOR STM350063 - POWER9 altivec supported System Information

Allocated 5505024 bytes for 2048 pacas at         (ptrval)
dt-cpu-ftrs: setup for ISA 3000
dt-cpu-ftrs: not enabling: system-call-vectored (disabled or unsupported by kernel)
dt-cpu-ftrs: final cpu/mmu features = 0x075c7afd18500249 0x3c006041
radix-mmu: Page sizes from device-tree:
radix-mmu: Page size shift = 12 AP=0x0
radix-mmu: Page size shift = 16 AP=0x5
radix-mmu: Page size shift = 21 AP=0x1
radix-mmu: Page size shift = 30 AP=0x2
radix-mmu: Initializing Radix MMU
radix-mmu: Partition table         (ptrval)
radix-mmu: Mapped 0x0000000000000000-0x0000000001200000 with 64.0 KiB pages
radix-mmu: Mapped 0x0000000001200000-0x0000000040000000 with 2.00 MiB pages
radix-mmu: Mapped 0x0000000040000000-0x0000002000000000 with 1.00 GiB pages
radix-mmu: Mapped 0x0000200000000000-0x0000202000000000 with 1.00 GiB pages
radix-mmu: Process table         (ptrval) and radix root for kernel:         (ptrval)
Linux version 4.16.0-rc4 (root@debian) (gcc version 7.3.0 (Debian 7.3.0-5)) #1 SMP Wed Mar 7 19:40:28 CST 2018
Found initrd at 0xc000000003900000:0xc000000012536675
OPAL: Found memory mapped LPC bus on chip 0
ISA: Non-PCI bridge is /lpcm-opb@6030000000000/lpc@0
Using PowerNV machine description
bootconsole [udbg0] enabled
CPU maps initialized for 4 threads per core
 (thread shift is 2)
Freed 5308416 bytes for unused pacas
-----------------------------------------------------
ppc64_pft_size    = 0x0
phys_mem_size     = 0x4000000000
dcache_bsize      = 0x80
icache_bsize      = 0x80
cpu_features      = 0x075c7afd18500249
  possible        = 0xdfffffff18500649
  always          = 0x0000000018100040
cpu_user_features = 0xdc0065c2 0xaec00000
mmu_features      = 0x3c006041
firmware_features = 0x0000000110000000
-----------------------------------------------------
cma: Reserved 13120 MiB at 0x0000201cc8000000
numa:   NODE_DATA [mem 0x1fffff6300-0x1fffffffff]
numa:   NODE_DATA [mem 0x201fff166300-0x201fff16ffff]
rfi-flush: Using mttrig type flush
rfi-flush: patched 9 locations
Initializing IODA2 PHB (/pciex@600c3c0000000)
PCI host bridge /pciex@600c3c0000000 (primary) ranges:
 MEM 0x000600c000000000..0x000600c07ffeffff -> 0x0000000080000000 
 MEM 0x0006000000000000..0x0006003fffffffff -> 0x0006000000000000 (M64 #1..31)
 Using M64 #31 as default window
  512 (511) PE's M32: 0x80000000 [segment=0x400000]
                 M64: 0x4000000000 [segment=0x20000000]
  Allocated bitmap for 4088 MSIs (base IRQ 0xfe000)
Initializing IODA2 PHB (/pciex@600c3c0100000)
PCI host bridge /pciex@600c3c0100000  ranges:
 MEM 0x000600c080000000..0x000600c0fffeffff -> 0x0000000080000000 
 MEM 0x0006004000000000..0x0006007fffffffff -> 0x0006004000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0xfd800)
Initializing IODA2 PHB (/pciex@600c3c0200000)
PCI host bridge /pciex@600c3c0200000  ranges:
 MEM 0x000600c100000000..0x000600c17ffeffff -> 0x0000000080000000 
 MEM 0x0006008000000000..0x000600bfffffffff -> 0x0006008000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0xfd000)
Initializing IODA2 PHB (/pciex@600c3c0300000)
PCI host bridge /pciex@600c3c0300000  ranges:
 MEM 0x000600c180000000..0x000600c1fffeffff -> 0x0000000080000000 
 MEM 0x0006020000000000..0x0006023fffffffff -> 0x0006020000000000 (M64 #1..31)
 Using M64 #31 as default window
  512 (511) PE's M32: 0x80000000 [segment=0x400000]
                 M64: 0x4000000000 [segment=0x20000000]
  Allocated bitmap for 4088 MSIs (base IRQ 0xfc000)
Initializing IODA2 PHB (/pciex@600c3c0400000)
PCI host bridge /pciex@600c3c0400000  ranges:
 MEM 0x000600c200000000..0x000600c27ffeffff -> 0x0000000080000000 
 MEM 0x0006024000000000..0x0006027fffffffff -> 0x0006024000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0xfb800)
Initializing IODA2 PHB (/pciex@600c3c0500000)
PCI host bridge /pciex@600c3c0500000  ranges:
 MEM 0x000600c280000000..0x000600c2fffeffff -> 0x0000000080000000 
 MEM 0x0006028000000000..0x000602bfffffffff -> 0x0006028000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0xfb000)
Initializing IODA2 PHB (/pciex@620c3c0000000)
PCI host bridge /pciex@620c3c0000000  ranges:
 MEM 0x000620c000000000..0x000620c07ffeffff -> 0x0000000080000000 
 MEM 0x0006200000000000..0x0006203fffffffff -> 0x0006200000000000 (M64 #1..31)
 Using M64 #31 as default window
  512 (511) PE's M32: 0x80000000 [segment=0x400000]
                 M64: 0x4000000000 [segment=0x20000000]
  Allocated bitmap for 4088 MSIs (base IRQ 0x1fe000)
Initializing IODA2 PHB (/pciex@620c3c0100000)
PCI host bridge /pciex@620c3c0100000  ranges:
 MEM 0x000620c080000000..0x000620c0fffeffff -> 0x0000000080000000 
 MEM 0x0006204000000000..0x0006207fffffffff -> 0x0006204000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0x1fd800)
Initializing IODA2 PHB (/pciex@620c3c0200000)
PCI host bridge /pciex@620c3c0200000  ranges:
 MEM 0x000620c100000000..0x000620c17ffeffff -> 0x0000000080000000 
 MEM 0x0006208000000000..0x000620bfffffffff -> 0x0006208000000000 (M64 #1..15)
 Using M64 #15 as default window
  256 (255) PE's M32: 0x80000000 [segment=0x800000]
                 M64: 0x4000000000 [segment=0x40000000]
  Allocated bitmap for 2040 MSIs (base IRQ 0x1fd000)
Initializing IODA2 PHB (/pciex@620c3c0300000)
PCI host bridge /pciex@620c3c0300000  ranges:
 MEM 0x000620c180000000..0x000620c1fffeffff -> 0x0000000080000000 
 MEM 0x0006220000000000..0x0006223fffffffff -> 0x0006220000000000 (M64 #1..31)
 Using M64 #31 as default window
  512 (511) PE's M32: 0x80000000 [segment=0x400000]
                 M64: 0x4000000000 [segment=0x20000000]
  Allocated bitmap for 4088 MSIs (base IRQ 0x1fc000)
OPAL nvram setup, 589824 bytes
Top of RAM: 0x202000000000, Total RAM: 0x4000000000
Memory hole size: 33423360MB
Zone ranges:
  DMA      [mem 0x0000000000000000-0x0000201fffffffff]
  DMA32    empty
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000000000-0x0000001fffffffff]
  node   8: [mem 0x0000200000000000-0x0000201fffffffff]
Initmem setup node 0 [mem 0x0000000000000000-0x0000001fffffffff]
On node 0 totalpages: 2097152
  DMA zone: 2048 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 2097152 pages, LIFO batch:1
Initmem setup node 8 [mem 0x0000200000000000-0x0000201fffffffff]
On node 8 totalpages: 2097152
  DMA zone: 2048 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 2097152 pages, LIFO batch:1
percpu: Embedded 4 pages/cpu @        (ptrval) s170776 r0 d91368 u262144
pcpu-alloc: s170776 r0 d91368 u262144 alloc=4*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 
pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 
pcpu-alloc: [1] 32 [1] 33 [1] 34 [1] 35 [1] 36 [1] 37 [1] 38 [1] 39 
pcpu-alloc: [1] 40 [1] 41 [1] 42 [1] 43 [1] 44 [1] 45 [1] 46 [1] 47 
pcpu-alloc: [1] 48 [1] 49 [1] 50 [1] 51 [1] 52 [1] 53 [1] 54 [1] 55 
pcpu-alloc: [1] 56 [1] 57 [1] 58 [1] 59 [1] 60 [1] 61 [1] 62 [1] 63 
Built 2 zonelists, mobility grouping on.  Total pages: 4190208
Policy zone: DMA
log_buf_len individual max cpu contribution: 4096 bytes
log_buf_len total cpu_extra contributions: 258048 bytes
log_buf_len min size: 131072 bytes
log_buf_len: 524288 bytes
early log buf free: 120380(91%)
Memory: 254248256K/268435456K available (9984K kernel code, 1600K rwdata, 2176K rodata, 1088K init, 2326K bss, 752320K reserved, 13434880K cma-reserved)
random: get_random_u32 called from cache_grow_begin+0x2c4/0x9b0 with crng_init=0
ftrace: allocating 25493 entries in 10 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=64.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
NR_IRQS: 512, nr_irqs: 512, preallocated irqs: 16
xive: Interrupt handling initialized with native backend
xive: Using priority 7 for all interrupts
xive: Using 64kB queues
time_init: decrementer frequency = 512.000000 MHz
time_init: processor frequency   = 3000.000000 MHz
time_init: 56 bit decrementer (max: 7fffffffffffff)
clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0x761537d007, max_idle_ns: 440795202126 ns
clocksource: timebase mult[1f40000] shift[24] registered
clockevent: decrementer mult[83126e98] shift[32] cpu[0]
Console: colour dummy device 80x25
console [hvc0] enabled
bootconsole [udbg0] disabled
mempolicy: Disabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
pid_max: default: 65536 minimum: 512
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 16777216 (order: 11, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 10, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 5, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 5, 2097152 bytes)
EEH: PowerNV platform initialized
POWER9 performance monitor hardware support registered
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
smp: Brought up 2 nodes, 64 CPUs
numa: Node 0 CPUs: 0-31
numa: Node 8 CPUs: 32-63
Using standard scheduler topology
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 16384 (order: 5, 2097152 bytes)
NET: Registered protocol family 16
EEH: No capable adapters found
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1522229693.128:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
PCI: Probing PCI hardware
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0x600c000000000-0x600c07ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0000:00: root bus resource [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
pci 0000:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0000:00:00.0: Disabling memory decoding and releasing memory resources
pci 0000:00:00.0: disabling bridge mem windows
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.0: [1002:67c4] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0x6000000000000-0x600000fffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0x6000010000000-0x60000101fffff 64bit pref]
pci 0000:01:00.0: reg 0x20: [io  0x0000-0x00ff]
pci 0000:01:00.0: reg 0x24: [mem 0x600c000000000-0x600c00003ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x600c000040000-0x600c00005ffff pref]
pci 0000:01:00.0: Disabling memory decoding and releasing memory resources
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:01:00.1: [1002:aaf0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0x600c000060000-0x600c000063fff 64bit]
pci 0000:01:00.1: Disabling memory decoding and releasing memory resources
pci 0000:01:00.1: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000
pci 0000:01:00.1: supports D1 D2
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0001:00
pci_bus 0001:00: root bus resource [mem 0x600c080000000-0x600c0fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0001:00: root bus resource [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
pci_bus 0001:00: root bus resource [bus 00-ff]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
pci 0001:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0001:00:00.0: Disabling memory decoding and releasing memory resources
pci 0001:00:00.0: disabling bridge mem windows
pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
pci 0001:00:00.0: PCI bridge to [bus 01]
pci 0001:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0002:00
pci_bus 0002:00: root bus resource [mem 0x600c100000000-0x600c17ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0002:00: root bus resource [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
pci_bus 0002:00: root bus resource [bus 00-ff]
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
pci 0002:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0002:00:00.0: Disabling memory decoding and releasing memory resources
pci 0002:00:00.0: disabling bridge mem windows
pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
pci 0002:01:00.0: [9005:028d] type 00 class 0x010700
pci 0002:01:00.0: reg 0x10: [mem 0x600c100000000-0x600c1000fffff 64bit]
pci 0002:01:00.0: reg 0x18: [mem 0x600c100180000-0x600c1001803ff 64bit]
pci 0002:01:00.0: reg 0x20: [io  0x0000-0x00ff]
pci 0002:01:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0002:01:00.0: Disabling memory decoding and releasing memory resources
pci 0002:01:00.0: BAR2 [mem size 0x00000400 64bit]: requesting alignment to 0x10000
pci 0002:01:00.0: PME# supported from D0 D1 D3hot
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0003:00
pci_bus 0003:00: root bus resource [mem 0x600c180000000-0x600c1fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0003:00: root bus resource [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
pci_bus 0003:00: root bus resource [bus 00-ff]
pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
pci 0003:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0003:00:00.0: Disabling memory decoding and releasing memory resources
pci 0003:00:00.0: disabling bridge mem windows
pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
pci 0003:01:00.0: [104c:8241] type 00 class 0x0c0330
pci 0003:01:00.0: reg 0x10: [mem 0x600c180000000-0x600c18000ffff 64bit]
pci 0003:01:00.0: reg 0x18: [mem 0x600c180010000-0x600c180011fff 64bit]
pci 0003:01:00.0: Disabling memory decoding and releasing memory resources
pci 0003:01:00.0: BAR2 [mem size 0x00002000 64bit]: requesting alignment to 0x10000
pci 0003:01:00.0: supports D1 D2
pci 0003:01:00.0: PME# supported from D0 D1 D2 D3hot
pci 0003:00:00.0: PCI bridge to [bus 01]
pci 0003:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0004:00
pci_bus 0004:00: root bus resource [mem 0x600c200000000-0x600c27ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0004:00: root bus resource [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci_bus 0004:00: root bus resource [bus 00-ff]
pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
pci 0004:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0004:00:00.0: Disabling memory decoding and releasing memory resources
pci 0004:00:00.0: disabling bridge mem windows
pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
pci 0004:01:00.0: [14e4:1657] type 00 class 0x020000
pci 0004:01:00.0: reg 0x10: [mem 0x6024000000000-0x602400000ffff 64bit pref]
pci 0004:01:00.0: reg 0x18: [mem 0x6024000010000-0x602400001ffff 64bit pref]
pci 0004:01:00.0: reg 0x20: [mem 0x6024000020000-0x602400002ffff 64bit pref]
pci 0004:01:00.0: Disabling memory decoding and releasing memory resources
pci 0004:01:00.0: PME# supported from D0 D3hot D3cold
pci 0004:01:00.1: [14e4:1657] type 00 class 0x020000
pci 0004:01:00.1: reg 0x10: [mem 0x6024000030000-0x602400003ffff 64bit pref]
pci 0004:01:00.1: reg 0x18: [mem 0x6024000040000-0x602400004ffff 64bit pref]
pci 0004:01:00.1: reg 0x20: [mem 0x6024000050000-0x602400005ffff 64bit pref]
pci 0004:01:00.1: Disabling memory decoding and releasing memory resources
pci 0004:01:00.1: PME# supported from D0 D3hot D3cold
pci 0004:00:00.0: PCI bridge to [bus 01]
pci 0004:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0005:00
pci_bus 0005:00: root bus resource [mem 0x600c280000000-0x600c2fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0005:00: root bus resource [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
pci_bus 0005:00: root bus resource [bus 00-ff]
pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
pci 0005:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0005:00:00.0: Disabling memory decoding and releasing memory resources
pci 0005:00:00.0: disabling bridge mem windows
pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
pci 0005:01:00.0: [1a03:1150] type 01 class 0x060400
pci 0005:01:00.0: Disabling memory decoding and releasing memory resources
pci 0005:01:00.0: disabling bridge mem windows
pci 0005:01:00.0: supports D1 D2
pci 0005:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0005:00:00.0: PCI bridge to [bus 01-02]
pci 0005:00:00.0:   bridge window [io  0x0000-0x0fff]
pci 0005:02:00.0: [1a03:2000] type 00 class 0x030000
pci 0005:02:00.0: reg 0x10: [mem 0x600c280000000-0x600c280ffffff]
pci 0005:02:00.0: reg 0x14: [mem 0x600c281000000-0x600c28101ffff]
pci 0005:02:00.0: reg 0x18: [io  0x0000-0x007f]
pci 0005:02:00.0: Disabling memory decoding and releasing memory resources
pci 0005:02:00.0: supports D1 D2
pci 0005:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0005:01:00.0: PCI bridge to [bus 02]
pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 02
PCI host bridge to bus 0030:00
pci_bus 0030:00: root bus resource [mem 0x620c000000000-0x620c07ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0030:00: root bus resource [mem 0x6200000000000-0x6203fbfffffff 64bit pref]
pci_bus 0030:00: root bus resource [bus 00-ff]
pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to ff
pci 0030:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0030:00:00.0: Disabling memory decoding and releasing memory resources
pci 0030:00:00.0: disabling bridge mem windows
pci 0030:00:00.0: PME# supported from D0 D3hot D3cold
pci 0030:00:00.0: PCI bridge to [bus 01]
pci 0030:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0030:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0031:00
pci_bus 0031:00: root bus resource [mem 0x620c080000000-0x620c0fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0031:00: root bus resource [mem 0x6204000000000-0x6207f7fffffff 64bit pref]
pci_bus 0031:00: root bus resource [bus 00-ff]
pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to ff
pci 0031:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0031:00:00.0: Disabling memory decoding and releasing memory resources
pci 0031:00:00.0: disabling bridge mem windows
pci 0031:00:00.0: PME# supported from D0 D3hot D3cold
pci 0031:01:00.0: [1102:0012] type 00 class 0x040300
pci 0031:01:00.0: reg 0x10: [mem 0x620c080000000-0x620c080003fff 64bit]
pci 0031:01:00.0: reg 0x18: [mem 0x620c080010000-0x620c080013fff 64bit]
pci 0031:01:00.0: Disabling memory decoding and releasing memory resources
pci 0031:01:00.0: BAR0 [mem size 0x00004000 64bit]: requesting alignment to 0x10000
pci 0031:01:00.0: BAR2 [mem size 0x00004000 64bit]: requesting alignment to 0x10000
pci 0031:01:00.0: supports D2
pci 0031:00:00.0: PCI bridge to [bus 01]
pci 0031:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0031:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0032:00
pci_bus 0032:00: root bus resource [mem 0x620c100000000-0x620c17ffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0032:00: root bus resource [mem 0x6208000000000-0x620bf7fffffff 64bit pref]
pci_bus 0032:00: root bus resource [bus 00-ff]
pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to ff
pci 0032:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0032:00:00.0: Disabling memory decoding and releasing memory resources
pci 0032:00:00.0: disabling bridge mem windows
pci 0032:00:00.0: PME# supported from D0 D3hot D3cold
pci 0032:00:00.0: PCI bridge to [bus 01]
pci 0032:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0032:00: busn_res: [bus 00-ff] end is updated to 01
PCI host bridge to bus 0033:00
pci_bus 0033:00: root bus resource [mem 0x620c180000000-0x620c1fffeffff] (bus address [0x80000000-0xfffeffff])
pci_bus 0033:00: root bus resource [mem 0x6220000000000-0x6223fbfffffff 64bit pref]
pci_bus 0033:00: root bus resource [bus 00-ff]
pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to ff
pci 0033:00:00.0: [1014:04c1] type 01 class 0x060400
pci 0033:00:00.0: Disabling memory decoding and releasing memory resources
pci 0033:00:00.0: disabling bridge mem windows
pci 0033:00:00.0: PME# supported from D0 D3hot D3cold
pci 0033:00:00.0: PCI bridge to [bus 01]
pci 0033:00:00.0:   bridge window [io  0x0000-0x0fff]
pci_bus 0033:00: busn_res: [bus 00-ff] end is updated to 01
pci 0000:00:00.0: BAR 15: assigned [mem 0x6000000000000-0x600001fffffff 64bit pref]
pci 0000:00:00.0: BAR 14: assigned [mem 0x600c000000000-0x600c0003fffff]
pci 0000:01:00.0: BAR 0: assigned [mem 0x6000000000000-0x600000fffffff 64bit pref]
pci 0000:01:00.0: BAR 2: assigned [mem 0x6000010000000-0x60000101fffff 64bit pref]
pci 0000:01:00.0: BAR 5: assigned [mem 0x600c000000000-0x600c00003ffff]
pci 0000:01:00.0: BAR 6: assigned [mem 0x600c000040000-0x600c00005ffff pref]
pci 0000:01:00.1: BAR 0: assigned [mem 0x600c000060000-0x600c000063fff 64bit]
pci 0000:01:00.0: BAR 4: no space for [io  size 0x0100]
pci 0000:01:00.0: BAR 4: failed to assign [io  size 0x0100]
pci 0000:00     : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0000:01     : [PE# 00] Secondary bus 1 associated with PE#0
pci 0000:01     : [PE# 00] Setting up 32-bit TCE table at 0..80000000
IOMMU table initialized, virtual merging enabled
pci 0000:01     : [PE# 00] Setting up window#0 0..7fffffff pg=1000
pci 0000:01     : [PE# 00] Enabling 64-bit DMA bypass
iommu: Adding device 0000:01:00.0 to group 0
iommu: Adding device 0000:01:00.1 to group 0
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
pci 0000:00:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0000:00: resource 4 [mem 0x600c000000000-0x600c07ffeffff]
pci_bus 0000:00: resource 5 [mem 0x6000000000000-0x6003fbfffffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0x600c000000000-0x600c07fefffff]
pci_bus 0000:01: resource 2 [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
pci 0001:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0001:00:00.0: PCI bridge to [bus 01]
pci_bus 0001:00: resource 4 [mem 0x600c080000000-0x600c0fffeffff]
pci_bus 0001:00: resource 5 [mem 0x6004000000000-0x6007f7fffffff 64bit pref]
pci 0002:00:00.0: BAR 14: assigned [mem 0x600c100000000-0x600c1007fffff]
pci 0002:01:00.0: BAR 0: assigned [mem 0x600c100000000-0x600c1000fffff 64bit]
pci 0002:01:00.0: BAR 6: assigned [mem 0x600c100100000-0x600c10017ffff pref]
pci 0002:01:00.0: BAR 2: assigned [mem 0x600c100180000-0x600c1001803ff 64bit]
pci 0002:01:00.0: BAR 4: no space for [io  size 0x0100]
pci 0002:01:00.0: BAR 4: failed to assign [io  size 0x0100]
pci 0002:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0002:01     : [PE# fd] Secondary bus 1 associated with PE#fd
pci 0002:01     : [PE# fd] Setting up 32-bit TCE table at 0..80000000
pci 0002:01     : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0002:01     : [PE# fd] Enabling 64-bit DMA bypass
iommu: Adding device 0002:01:00.0 to group 1
pci 0002:00:00.0: PCI bridge to [bus 01]
pci 0002:00:00.0:   bridge window [mem 0x600c100000000-0x600c17fefffff]
pci_bus 0002:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0002:00: resource 4 [mem 0x600c100000000-0x600c17ffeffff]
pci_bus 0002:00: resource 5 [mem 0x6008000000000-0x600bf7fffffff 64bit pref]
pci_bus 0002:01: resource 1 [mem 0x600c100000000-0x600c17fefffff]
pci 0003:00:00.0: BAR 14: assigned [mem 0x600c180000000-0x600c1803fffff]
pci 0003:01:00.0: BAR 0: assigned [mem 0x600c180000000-0x600c18000ffff 64bit]
pci 0003:01:00.0: BAR 2: assigned [mem 0x600c180010000-0x600c180011fff 64bit]
pci 0003:00     : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0003:01     : [PE# 1fd] Secondary bus 1 associated with PE#1fd
pci 0003:01     : [PE# 1fd] Setting up 32-bit TCE table at 0..80000000
pci 0003:01     : [PE# 1fd] Setting up window#0 0..7fffffff pg=1000
pci 0003:01     : [PE# 1fd] Enabling 64-bit DMA bypass
iommu: Adding device 0003:01:00.0 to group 2
pci 0003:00:00.0: PCI bridge to [bus 01]
pci 0003:00:00.0:   bridge window [mem 0x600c180000000-0x600c1ffefffff]
pci_bus 0003:00: resource 4 [mem 0x600c180000000-0x600c1fffeffff]
pci_bus 0003:00: resource 5 [mem 0x6020000000000-0x6023fbfffffff 64bit pref]
pci_bus 0003:01: resource 1 [mem 0x600c180000000-0x600c1ffefffff]
pci 0004:00:00.0: BAR 15: assigned [mem 0x6024000000000-0x602403fffffff 64bit pref]
pci 0004:01:00.0: BAR 0: assigned [mem 0x6024000000000-0x602400000ffff 64bit pref]
pci 0004:01:00.0: BAR 2: assigned [mem 0x6024000010000-0x602400001ffff 64bit pref]
pci 0004:01:00.0: BAR 4: assigned [mem 0x6024000020000-0x602400002ffff 64bit pref]
pci 0004:01:00.1: BAR 0: assigned [mem 0x6024000030000-0x602400003ffff 64bit pref]
pci 0004:01:00.1: BAR 2: assigned [mem 0x6024000040000-0x602400004ffff 64bit pref]
pci 0004:01:00.1: BAR 4: assigned [mem 0x6024000050000-0x602400005ffff 64bit pref]
pci 0004:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0004:01     : [PE# 00] Secondary bus 1 associated with PE#0
pci 0004:01     : [PE# 00] Setting up 32-bit TCE table at 0..80000000
pci 0004:01     : [PE# 00] Setting up window#0 0..7fffffff pg=1000
pci 0004:01     : [PE# 00] Enabling 64-bit DMA bypass
iommu: Adding device 0004:01:00.0 to group 3
iommu: Adding device 0004:01:00.1 to group 3
pci 0004:00:00.0: PCI bridge to [bus 01]
pci 0004:00:00.0:   bridge window [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci_bus 0004:00: resource 4 [mem 0x600c200000000-0x600c27ffeffff]
pci_bus 0004:00: resource 5 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci_bus 0004:01: resource 2 [mem 0x6024000000000-0x6027f7fffffff 64bit pref]
pci 0005:00:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
pci 0005:01:00.0: BAR 14: assigned [mem 0x600c280000000-0x600c2817fffff]
pci 0005:01:00.0: BAR 13: no space for [io  size 0x1000]
pci 0005:01:00.0: BAR 13: failed to assign [io  size 0x1000]
pci 0005:02:00.0: BAR 0: assigned [mem 0x600c280000000-0x600c280ffffff]
pci 0005:02:00.0: BAR 1: assigned [mem 0x600c281000000-0x600c28101ffff]
pci 0005:02:00.0: BAR 2: no space for [io  size 0x0080]
pci 0005:02:00.0: BAR 2: failed to assign [io  size 0x0080]
pci 0005:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0005:02     : [PE# fd] Secondary bus 2..2 associated with PE#fd
pci 0005:02     : [PE# fd] Setting up 32-bit TCE table at 0..80000000
pci 0005:02     : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0005:02     : [PE# fd] Enabling 64-bit DMA bypass
iommu: Adding device 0005:02:00.0 to group 4
pci 0005:01:00.0: PCI bridge to [bus 02]
pci 0005:01:00.0:   bridge window [mem 0x600c280000000-0x600c2ffefffff]
pci 0005:01     : [PE# fc] Secondary bus 1 associated with PE#fc
pci 0005:00:00.0: PCI bridge to [bus 01-02]
pci 0005:00:00.0:   bridge window [mem 0x600c280000000-0x600c2ffefffff]
pci_bus 0005:00: Some PCI device resources are unassigned, try booting with pci=realloc
pci_bus 0005:00: resource 4 [mem 0x600c280000000-0x600c2fffeffff]
pci_bus 0005:00: resource 5 [mem 0x6028000000000-0x602bf7fffffff 64bit pref]
pci_bus 0005:01: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
pci_bus 0005:02: resource 1 [mem 0x600c280000000-0x600c2ffefffff]
pci 0030:00     : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0030:00:00.0: PCI bridge to [bus 01]
pci_bus 0030:00: resource 4 [mem 0x620c000000000-0x620c07ffeffff]
pci_bus 0030:00: resource 5 [mem 0x6200000000000-0x6203fbfffffff 64bit pref]
pci 0031:00:00.0: BAR 14: assigned [mem 0x620c080000000-0x620c0807fffff]
pci 0031:01:00.0: BAR 0: assigned [mem 0x620c080000000-0x620c080003fff 64bit]
pci 0031:01:00.0: BAR 2: assigned [mem 0x620c080010000-0x620c080013fff 64bit]
pci 0031:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0031:01     : [PE# fd] Secondary bus 1 associated with PE#fd
pci 0031:01     : [PE# fd] Setting up 32-bit TCE table at 0..80000000
pci 0031:01     : [PE# fd] Setting up window#0 0..7fffffff pg=1000
pci 0031:01     : [PE# fd] Enabling 64-bit DMA bypass
iommu: Adding device 0031:01:00.0 to group 5
pci 0031:00:00.0: PCI bridge to [bus 01]
pci 0031:00:00.0:   bridge window [mem 0x620c080000000-0x620c0ffefffff]
pci_bus 0031:00: resource 4 [mem 0x620c080000000-0x620c0fffeffff]
pci_bus 0031:00: resource 5 [mem 0x6204000000000-0x6207f7fffffff 64bit pref]
pci_bus 0031:01: resource 1 [mem 0x620c080000000-0x620c0ffefffff]
pci 0032:00     : [PE# fe] Secondary bus 0 associated with PE#fe
pci 0032:00:00.0: PCI bridge to [bus 01]
pci_bus 0032:00: resource 4 [mem 0x620c100000000-0x620c17ffeffff]
pci_bus 0032:00: resource 5 [mem 0x6208000000000-0x620bf7fffffff 64bit pref]
pci 0033:00     : [PE# 1fe] Secondary bus 0 associated with PE#1fe
pci 0033:00:00.0: PCI bridge to [bus 01]
pci_bus 0033:00: resource 4 [mem 0x620c180000000-0x620c1fffeffff]
pci_bus 0033:00: resource 5 [mem 0x6220000000000-0x6223fbfffffff 64bit pref]
PCI: Probing PCI hardware done
cpuidle-powernv: Default stop: psscr = 0x0000000000000330,mask=0x00000000003003ff
cpuidle-powernv: Deepest stop: psscr = 0x0000000000300330,mask=0x00000000003003ff
cpuidle-powernv: Requested Level (RL) value of first deep stop = 0xf
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0005:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
pci 0005:02:00.0: vgaarb: bridge control possible
pci 0000:01:00.0: vgaarb: bridge control possible
pci 0005:02:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
clocksource: Switched to clocksource timebase
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
AppArmor: AppArmor Filesystem Enabled
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 65536 (order: 4, 1048576 bytes)
TCP established hash table entries: 524288 (order: 6, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 5, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 5, 2097152 bytes)
NET: Registered protocol family 1
pci 0003:00:00.0: enabling device (0101 -> 0103)
pci 0003:01:00.0: enabling device (0140 -> 0142)
PCI: CLS 0 bytes, default 128
Unpacking initramfs...
Freeing initrd memory: 241856K
nest_capp0_imc performance monitor hardware support registered
core_imc performance monitor hardware support registered
nest_mba0_imc performance monitor hardware support registered
nest_mba1_imc performance monitor hardware support registered
nest_mba4_imc performance monitor hardware support registered
nest_mba5_imc performance monitor hardware support registered
nest_mcs01_imc performance monitor hardware support registered
nest_mcs23_imc performance monitor hardware support registered
nest_nx_imc performance monitor hardware support registered
nest_phb0_imc performance monitor hardware support registered
nest_phb1_imc performance monitor hardware support registered
nest_phb2_imc performance monitor hardware support registered
nest_phb3_imc performance monitor hardware support registered
nest_phb4_imc performance monitor hardware support registered
nest_phb5_imc performance monitor hardware support registered
nest_powerbus0_imc performance monitor hardware support registered
thread_imc performance monitor hardware support registered
nest_xlink1_imc performance monitor hardware support registered
Initialise system trusted keyrings
workingset: timestamp_bits=38 max_order=22 bucket_order=0
zbud: loaded
random: fast init done
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
pcieport 0000:00:00.0: enabling device (0101 -> 0103)
pcieport 0002:00:00.0: enabling device (0101 -> 0103)
pcieport 0004:00:00.0: enabling device (0101 -> 0103)
pcieport 0005:00:00.0: enabling device (0101 -> 0103)
pcieport 0031:00:00.0: enabling device (0101 -> 0103)
pci 0005:01:00.0: enabling device (0141 -> 0143)
pci 0005:02:00.0: enabling device (0141 -> 0143)
Using unsupported 1024x768 vga at 600c280010000, depth=32, pitch=4096
Console: switching to colour frame buffer device 128x48
fb0: Open Firmware frame buffer device on /pciex@600c3c0500000/pci@0/pci@0/vga@0
hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
hvc0: No interrupts property, using OPAL event
Linux agpgart interface v0.103
mousedev: PS/2 mouse device common for all mice
rtc-opal opal-rtc: rtc core: registered rtc-opal as rtc0
powernv-cpufreq: cpufreq pstate min 0x63 nominal 0x30 max 0x0
powernv-cpufreq: Workload Optimized Frequency is enabled in the platform
powernv_idle_driver registered
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
drmem: No dynamic reconfiguration memory found
registered taskstats version 1
Loading compiled-in X.509 certificates
zswap: loaded using pool lzo/zbud
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
rtc-opal opal-rtc: setting system clock to 2018-03-28 09:34:59 UTC (1522229699)
Freeing unused kernel memory: 1088K
synth uevent: /devices/vio: failed to send uevent
vio vio: uevent: failed to send synthetic uevent
Adaptec aacraid driver 1.2.1[50877]-custom
aacraid 0002:01:00.0: enabling device (0140 -> 0142)
aacraid: Comm Interface type3 enabled
AAC0: kernel 3.2-0[0] Apr 24 2017
AAC0: monitor 0.0-0[0]
AAC0: bios 0.13-209[32000]
AAC0: serial 10F447
AAC0: Non-DASD support enabled.
AAC0: 64bit support enabled.
aacraid 0002:01:00.0: Using 64-bit DMA iommu bypass
aacraid 0002:01:00.0: 64 Bit DAC enabled
scsi host0: aacraid
scsi 0:2:0:0: Direct-Access     ATA      MAXTOR STM350063 E    PQ: 0 ANSI: 6
tg3.c:v3.137 (May 11, 2014)
tg3 0004:01:00.0: enabling device (0140 -> 0142)
scsi 0:3:123:0: Enclosure         ADAPTEC  Smart Adapter    3.02 PQ: 0 ANSI: 5
ses 0:3:123:0: Attached Enclosure device
tg3 0004:01:00.0: Using 64-bit DMA iommu bypass
tg3 0004:01:00.0 eth0: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:01:1b
tg3 0004:01:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0004:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0004:01:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
tg3 0004:01:00.1: enabling device (0140 -> 0142)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
sd 0:2:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 46 00 10 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
tg3 0004:01:00.1: Using 64-bit DMA iommu bypass
tg3 0004:01:00.1 eth1: Tigon3 [partno(BCM95719) rev 5719001] (PCI Express) MAC address 2c:09:4d:00:01:1c
tg3 0004:01:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0004:01:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0004:01:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
tg3 0004:01:00.1 enP4p1s0f1: renamed from eth1
xhci_hcd 0003:01:00.0: xHCI Host Controller
xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0003:01:00.0: Using 64-bit DMA iommu bypass
xhci_hcd 0003:01:00.0: hcc params 0x0270f06d hci version 0x96 quirks 0x04000000
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.16.0-rc4 xhci-hcd
usb usb1: SerialNumber: 0003:01:00.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
xhci_hcd 0003:01:00.0: xHCI Host Controller
xhci_hcd 0003:01:00.0: new USB bus registered, assigned bus number 2
usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.16.0-rc4 xhci-hcd
usb usb2: SerialNumber: 0003:01:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
 sda: sda1 sda2 sda3
tg3 0004:01:00.0 enP4p1s0f0: renamed from eth0
sd 0:2:0:0: [sda] Attached SCSI disk
usb 1-4: new high-speed USB device number 2 using xhci_hcd
usb 1-4: New USB device found, idVendor=05e3, idProduct=0610
usb 1-4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 1-4: Product: USB2.0 Hub
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 4 ports detected
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture ppc64-le.
systemd[1]: Set hostname to .
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
synth uevent: /devices/vio: failed to send uevent
vio vio: uevent: failed to send synthetic uevent
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[631]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
at24 0-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 1-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 3-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 4-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 5-0050: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 5-0052: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 6-0054: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 6-0056: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 7-0050: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 8-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 10-0054: 16384 byte 24c128 EEPROM, writable, 1 bytes/write
at24 11-0050: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 11-0052: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 12-0054: 256 byte spd EEPROM, read-only, 0 bytes/write
at24 12-0056: 256 byte spd EEPROM, read-only, 0 bytes/write
Using 'aes-generic' as fallback implementation.
crypto_register_alg 'aes' = 0
ipmi device interface
Using 'cbc(aes-generic)' as fallback implementation.
crypto_register_alg 'cbc(aes)' = 0
Using 'ctr(aes-generic)' as fallback implementation.
crypto_register_alg 'ctr(aes)' = 0
Using 'aes-generic' as fallback implementation.
Using 'aes-generic' as fallback implementation.
Using 'aes-generic' as fallback implementation.
Using 'aes-generic' as fallback implementation.
Using 'aes-generic' as fallback implementation.
Using 'xts(ecb(p8_aes))' as fallback implementation.
crypto_register_alg 'xts(aes)' = 0
ipmi-powernv ibm,opal:ipmi: Found new BMC (man_id: 0x000000, prod_id: 0x0000, dev_id: 0x00)
Using 'ghash-generic' as fallback implementation.
sd 0:2:0:0: Attached scsi generic sg0 type 0
ses 0:3:123:0: Attached scsi generic sg1 type 13
Adding 12243904k swap on /dev/sda3.  Priority:-2 extents:1 across:12243904k FS
snd_hda_intel 0000:01:00.1: enabling device (0540 -> 0542)
snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
snd_hda_intel 0031:01:00.0: enabling device (0140 -> 0142)
snd_hda_intel 0031:01:00.0: Disabling MSI
snd_hda_intel 0031:01:00.0: Force to snoop mode by module option
snd_hda_intel 0031:01:00.0: Using 32-bit DMA via iommu
snd_hda_intel 0000:01:00.1: Using 32-bit DMA via iommu
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input0
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input1
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input2
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input3
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input4
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input5
snd_hda_codec_realtek hdaudioC1D1: autoconfig for ALC898: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC1D1:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D1:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D1:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D1:    inputs:
snd_hda_codec_realtek hdaudioC1D1:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC1D1:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC1D1:      Line=0x1a
input: HDA Digital PCBeep as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input6
input: HDA Creative Front Mic as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input7
input: HDA Creative Rear Mic as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input8
input: HDA Creative Line as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input9
input: HDA Creative Line Out Front as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input10
input: HDA Creative Line Out Surround as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input11
input: HDA Creative Line Out CLFE as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input12
input: HDA Creative Front Headphone as /devices/pci0031:00/0031:00:00.0/0031:01:00.0/sound/card1/input13
audit: type=1400 audit(1522229712.648:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1032 comm="apparmor_parser"
audit: type=1400 audit(1522229712.648:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1030 comm="apparmor_parser"
audit: type=1400 audit(1522229712.800:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1028 comm="apparmor_parser"
audit: type=1400 audit(1522229712.800:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1028 comm="apparmor_parser"
audit: type=1400 audit(1522229712.800:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1028 comm="apparmor_parser"
audit: type=1400 audit(1522229712.800:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=1029 comm="apparmor_parser"
audit: type=1400 audit(1522229712.828:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice" pid=1031 comm="apparmor_parser"
audit: type=1400 audit(1522229712.828:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=1031 comm="apparmor_parser"
[drm] amdgpu kernel modesetting enabled.
checking generic (600c280010000 300000) vs hw (6000000000000 10000000)
amdgpu 0000:01:00.0: enabling device (0140 -> 0142)
[drm] initializing kernel modesetting (POLARIS10 0x1002:0x67C4 0x1028:0x0B0D 0x00).
[drm] register mmio base: 0x00000000
[drm] register mmio size: 262144
[drm] PCI I/O BAR is not found.
[drm] probing gen 2 caps for device 1014:4c1 = 300104/180001e
[drm] probing mlw for device 1014:4c1 = 300104
[drm] UVD is enabled in VM mode
[drm] UVD ENC is enabled in VM mode
[drm] VCE enabled in VM mode
ATOM BIOS: 113-C9540400-101
[drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
amdgpu: No suitable DMA available
amdgpu 0000:01:00.0: BAR 2: releasing [mem 0x6000010000000-0x60000101fffff 64bit pref]
amdgpu 0000:01:00.0: BAR 0: releasing [mem 0x6000000000000-0x600000fffffff 64bit pref]
pci 0000:00:00.0: BAR 15: releasing [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
pci 0000:00:00.0: BAR 15: assigned [mem 0x6000000000000-0x60002ffffffff 64bit pref]
amdgpu 0000:01:00.0: BAR 0: assigned [mem 0x6000000000000-0x60001ffffffff 64bit pref]
amdgpu 0000:01:00.0: BAR 2: assigned [mem 0x6000200000000-0x60002001fffff 64bit pref]
pci 0000:00:00.0: PCI bridge to [bus 01]
pci 0000:00:00.0:   bridge window [mem 0x600c000000000-0x600c07fefffff]
pci 0000:00:00.0:   bridge window [mem 0x6000000000000-0x6003fbff0ffff 64bit pref]
amdgpu 0000:01:00.0: VRAM: 8192M 0x000000F400000000 - 0x000000F5FFFFFFFF (8192M used)
amdgpu 0000:01:00.0: GTT: 256M 0x0000000000000000 - 0x000000000FFFFFFF
[drm] Detected VRAM RAM=8192M, BAR=8192M
[drm] RAM width 256bits GDDR5
[TTM] Zone  kernel: Available graphics memory: 133963520 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[drm] amdgpu: 8192M of VRAM memory ready
[drm] amdgpu: 8192M of GTT memory ready.
[drm] GART: num cpu pages 4096, num gpu pages 65536
[drm] PCIE GART of 256M enabled (table at 0x000000F400040000).
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] AMDGPU Display Connectors
[drm] Connector 0:
[drm]   DP-1
[drm]   HPD6
[drm]   DDC: 0x4868 0x4868 0x4869 0x4869 0x486a 0x486a 0x486b 0x486b
[drm]   Encoders:
[drm]     DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm]   DP-2
[drm]   HPD4
[drm]   DDC: 0x4870 0x4870 0x4871 0x4871 0x4872 0x4872 0x4873 0x4873
[drm]   Encoders:
[drm]     DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm]   DP-3
[drm]   HPD1
[drm]   DDC: 0x486c 0x486c 0x486d 0x486d 0x486e 0x486e 0x486f 0x486f
[drm]   Encoders:
[drm]     DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm]   DP-4
[drm]   HPD3
[drm]   DDC: 0x4874 0x4874 0x4875 0x4875 0x4876 0x4876 0x4877 0x4877
[drm]   Encoders:
[drm]     DFP4: INTERNAL_UNIPHY
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris10_pfp_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris10_me_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris10_ce_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris10_mec_2.bin failed with error -2
amdgpu 0000:01:00.0: Direct firmware load for amdgpu/polaris10_mec2_2.bin failed with error -2
[drm] Found UVD firmware Version: 1.79 Family ID: 16
[drm] UVD ENC is disabled
[drm] Found VCE firmware Version: 52.4 Binary ID: 3
[drm] UVD initialized successfully.
[drm] VCE initialized successfully.
[drm] Cannot find any crtc or sizes
[drm] Initialized amdgpu 3.23.0 20150101 for 0000:01:00.0 on minor 0
[drm] Cannot find any crtc or sizes
[drm] Cannot find any crtc or sizes
tg3 0004:01:00.0 enP4p1s0f0: Link is up at 100 Mbps, full duplex
tg3 0004:01:00.0 enP4p1s0f0: Flow control is on for TX and on for RX
tg3 0004:01:00.0 enP4p1s0f0: EEE is disabled
IPv6: ADDRCONF(NETDEV_UP): enP4p1s0f0: link is not ready
IPv6: ADDRCONF(NETDEV_CHANGE): enP4p1s0f0: link becomes ready
IPv6: ADDRCONF(NETDEV_UP): enP4p1s0f1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): enP4p1s0f1: link is not ready
amdgpu 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
Using 'aes-generic' as fallback implementation.
audit: type=1400 audit(1522323449.467:10): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-xpdfimport" pid=59562 comm="apparmor_parser"
audit: type=1400 audit(1522323449.467:11): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-senddoc" pid=59560 comm="apparmor_parser"
audit: type=1400 audit(1522323449.495:12): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libreoffice-oopslash" pid=59559 comm="apparmor_parser"
audit: type=1400 audit(1522323450.139:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice" pid=59561 comm="apparmor_parser"
audit: type=1400 audit(1522323450.163:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libreoffice-soffice//gpg" pid=59561 comm="apparmor_parser"
audit: type=1400 audit(1522323450.551:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/bin/man" pid=59563 comm="apparmor_parser"
audit: type=1400 audit(1522323450.551:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="man_filter" pid=59563 comm="apparmor_parser"
audit: type=1400 audit(1522323450.551:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="man_groff" pid=59563 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): enP4p1s0f1: link is not ready
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
SGI XFS with ACLs, security attributes, realtime, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
ntfs: driver 2.1.32 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
xor: measuring software checksum speed
   8regs     : 12000.000 MB/sec
   8regs_prefetch: 13104.000 MB/sec
   32regs    : 16448.000 MB/sec
   32regs_prefetch: 13024.000 MB/sec
   altivec   : 19296.000 MB/sec
xor: using function: altivec (19296.000 MB/sec)
raid6: altivecx1 gen()  6033 MB/s
raid6: altivecx2 gen() 10247 MB/s
raid6: altivecx4 gen() 11128 MB/s
raid6: altivecx8 gen()  9695 MB/s
raid6: int64x1  gen()  3559 MB/s
raid6: int64x1  xor()  1175 MB/s
raid6: int64x2  gen()  6092 MB/s
raid6: int64x2  xor()  2104 MB/s
raid6: int64x4  gen()  7010 MB/s
raid6: int64x4  xor()  2465 MB/s
raid6: int64x8  gen()  4695 MB/s
raid6: int64x8  xor()  1749 MB/s
raid6: using algorithm altivecx4 gen() 11128 MB/s
raid6: using intx1 recovery algorithm
Btrfs loaded, crc32c=crc32c-generic
fuse init (API version 7.26)
systemd: 32 output lines suppressed due to ratelimiting
systemd[1]: systemd 238 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture ppc64-le.
systemd[1]: File /lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
systemd[1]: Stopping Journal Service...
systemd-journald[631]: Received SIGTERM from PID 1 (systemd).
systemd[1]: Stopped Journal Service.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.

Return To MAXTOR STM350063 - POWER9 altivec supported System Information